TIMER BASED GENERATOR START AND STOP
ABSTRACT
This paper contains all
about time based generator start and stop with interface, for the past years
now we all know that generator has been a very good means of solving power
problem in our country due lack of consistency in power supply so almost all
the home in our country poses one or two generator in their various homes. But
even at that, the stress of starting and stopping the GEN. has been a challenge
to some people and resulting to not ONING the GEN. because of the stress and
that is while we come out with this project to solve the problem. And with this
system the problem will b 90% solved.
Chapter 1
Introduction
The heart of a generator control panel is its
ability to automatically start and stop a generators engine. This is accomplished by
sensing when the Automatic Transfer Switch needs the generator to run. The
Generator Control Panel, turns on the fuel or ignition, and engages the
starter. It senses that the engine has started, disengages the starter, and
waits for the Automatic Transfer Switch to request that the generator be shut
down but in our system there is no ATS. Another critical function that the
generator control panel can perform is protecting your generators engine. The
more advanced the Generator Control Panel, the more things it can monitor. The
monitoring of generator functions such as voltage, current, frequency, are all
possible. Some Generator Control panels have built in displays so that an
operator can visually check on the generators function. Some have remote
communication capability to alert personnel of a problem. Some simple Generator
Control Panels can be programmed from the front panel with parameters unique to
a specific installation.
AIM/OBJECTIVE
OF THE PROJECT
The objective of the is
to design a device that can be used to control our generator automatically
without any stress.
SIGNIFICANCE
OF THE PROJECT
We are in the 21st
century where technology has made almost very thing easy without stress such as
money transfer, money withdrawer, recharging of airtime and many more. Time
based generator start and stop with interface is very significant because
almost all the home in our area have GEN. and we have old people in the house which
sometimes cannot start the GEN. so with this system now, we don’t need to
disturb our self about they will go with the GEN. because it will automatically
start and stop itself.
LIMITATION
OF THE PROJECT
1.
It does not have the ability to check
the level of fuel, gas or oil on it.
2.
It cannot use on small generator like
tiger etc.
3.
It will not changeover when there is
main supply.
4.
It very costly.
APPLICATIONS AND ADVANTAGES OF THE PROJECT
1. This
project can be used in the companies to switch the generator.
2. Can
be used in green house.
No comments:
Post a Comment